Steel Metal Roof tile panel roll forming machine

Steel metal Roof tile panel roll forming machine

Technical Parameters

Material:

( 1) Coil Width: 914 mm to 1250mm

( 2) Suitable Coil Thickness: 0.3mm ~ 0.6mm

( 3) Suitable Raw Materials:

Pre-painted Coil; Yield bearing stress: 235MPa

Machine Components:

( 1) Manual Un-coiler 1 set

( 2) Roll-Forming M/ C 1 set

( 3) Hydraulic Pressing Die/ Cutting M/ C 1 set

( 4) PLC Control System 1 set

Technical Specification

( 1) Manual Un-coiler:

Un-powered; max.capacity: 5 ton

* Hydraulic Un-Coiler( option) :

Hydraulic system to expand coil inner hole;

Frequency Inverter to regulate turning speed;

Automatic stop device; Load capacity = Max.5Tons;

2) Roll-Forming M/ C:

Gear/ Sprocket driving; 13-step to form(according profile)

Forming speed: Approx. 3-6m/ min;

( 3) Hydraulic Pressing Die & Cutting M/ C:

Stop to cut, Pressing die and Post cut

Material of Pressing tool: Cr40, Heat treatment ; Pressing Depth: 15mm

Material of cutting tool: Cr12

( 4) PLC Control System:

Control the quantity, cutting length automatically

Cut-to-length tolerance 3.0 mm

Option

Hydraulic un-coiler

Hydraulic system to expand coil inner hole;

Frequency Inverter to regulate turning speed, Automatic stop device; Load capacity = Max.5Tons